Clear Aligner Manufacturing

Clear Aligner Manufacturing Without Building a Factory

A vetted network of manufacturing partners and orthodontist-led planning, from the first treatment plan to packaged aligners. No equipment to buy and no minimum order.

Get Your First Case Free
How It’s Made

From Digital Records to Packaged Aligners

Six steps, from the case record to the box that ships to your practice or patient.

1

Records and review

Prescription details, digital impressions (3D scans), photos and X-rays arrive through the secure portal. Clinicians review the record, and flag anything unclear right away.

2

Treatment plan

The desired tooth movement is broken into a series of smaller steps and delivered as an interactive 3D model. You approve it as-is or request changes.

3

3D printing

Once you approve, each step of the plan is 3D printed.

4

Thermoforming

Each printed step is thermoformed using FDA 510(k)-cleared Zendura or Essix material.

5

Trimming and polishing

Each aligner is trimmed and polished into a custom aligner for the patient.

6

Quality control and shipping

Every batch goes through quality control before it is packaged and shipped to you or your patient, with a tracking number.

Manufacturing Partners

Every Facility Is Vetted, Not Just Certified

We do not just check for a certificate. Each manufacturing partner goes through multiple rounds of trials before joining the network.

10+ yrs

Operating history

The minimum experience required to join the manufacturing network.

100+

Employees

Established, adequately staffed production facilities only.

30,000+

Aligners per month

Minimum production capacity, so turnaround holds up at scale.

Proven

On our own cases first

Every manufacturer demonstrates quality by producing for our own patients before taking yours.

Materials & Certifications

What the Certifications Mean, and What They Don’t

FDA 510(k) clearance applies to the aligner material (Essix and Zendura) used in every case. It is a device-level determination, not a certification of any single manufacturing partner’s process.

ISO 13485 certifies a manufacturer’s quality management system: document control, risk management, traceability, corrective and preventive action, and ongoing surveillance audits. AlignerHub states that every manufacturing partner in its network is ISO 13485 certified, and each case uses cleared material on top of that.

Do not take either claim on trust, from us or anyone else. Our FDA and ISO verification guide shows how to check them, FDA clearance explained and ISO 13485 explained cover the details, and the 14-question checklist works for any supplier.

Skip the Capital Spend

What You Don’t Need to Buy

Building this in-house means equipment, certification and a production team. Outsourcing replaces all of that with a per-case cost.

No printer or thermoformer

In-house, a dental-grade SLA printer runs $8,000–$20,000 and thermoforming equipment $2,000–$14,000, before staff.

See the equipment prices →

No new certification

The quality certifications sit on the manufacturing partner’s side, not yours.

What to verify in any partner →

See your own numbers

Apply the sourced cost ranges to your case volume and compare building in-house with outsourcing.

Open the calculator →

You still need a way to capture patient records: an intraoral scanner, or physical impressions. No 3D printer, aligner-forming equipment or new certification is required on your end.

Who We Manufacture For

One Manufacturing Network, Four Kinds of Customer

Dental practices

Offer aligners to your patients without an in-house lab or a learning curve.

For dentists →

Labs & DSOs

Outsource planning, manufacturing or both, and scale volume without adding headcount.

For labs & DSOs →

Aligner entrepreneurs

Launch your own aligner brand without becoming a manufacturer.

Start your brand →

Practices switching providers

The same quality, without volume tiers or minimum commitments.

Why practices switch →
Questions

Clear Aligner Manufacturing FAQ

Does AlignerHub run its own aligner factory?

AlignerHub works with a vetted network of manufacturing partners rather than a single factory. Each partner needs at least 10 years of operating history, 100+ employees and capacity for 30,000+ aligners a month, and must first prove its quality by producing for AlignerHub’s own patients.

What material are the aligners made from?

Every case uses FDA 510(k)-cleared Essix or Zendura aligner material. The clearance applies to the material, not to any single manufacturing partner’s process, so partners are also required to hold quality certifications. See Zendura vs Essix compared.

How are aligners trimmed and finished?

After each step is thermoformed, the aligner is trimmed and polished to produce a custom aligner for the patient. Every batch goes through quality control before it ships.

Can I use only the manufacturing, without treatment planning?

Yes. Treatment planning and manufacturing are separate services, so you can use manufacturing only, planning only, or both.

Which countries do you ship to?

Currently the United States, Canada, Mexico, Europe, Australia, the United Kingdom and New Zealand. The list is subject to change as more are added. You receive an Airway Bill number to track each package.

Is there a minimum order?

No. There is no minimum order quantity or volume commitment. Pricing is US$20 per aligner or retainer, plus a US$70 treatment planning fee (free on your first case) and shipping from US$40.

See the Quality on Your Own Case

Your first treatment plan is free, and if you proceed to manufacturing your first 10 aligners are free as well.